Menu

A world class knowledge enterprise...

  • Admission Helpline No.

  • +91-93112-79511, 93557-93557
    93159-93004

line

Laboratories

BASIC MECHANICAL ENGINEERING LABORATORY

The purpose of this Laboratory is to study the preliminary process to understand the importance of materials and manufacturing methods. In this lab student will trained with basic machine tools such as turbines, pump, boiler, refrigeration and air conditioning.

  • List of Equipment’s in the laboratory.
  1. Model of winch crab.
  2. Worm & Worm wheel apparatus.
  3. Screw Jack apparatus.
  4. Compound Screw Jack apparatus.
  5. Model of Impulse Turbine.
  6. Model of Jib Crane.
  7. Model of Two Stroke Petrol Engine.
  8. Model of Four Stroke Petrol Engine.
  9. Model of Two Stroke Diesel Engine.
  10. Model of Four Stroke Diesel Engine.
  11. Model of Kaplan Turbine.
  12. Model of Francis Turbine.
  13. Model of Pelton Turbine.
  14. Model of Cochran Boiler.
  15. Model of Babcock & Wilcox Boiler.
  16. Boiler Mountings & Accessories.

ENGINEERING GRAPHICS AND DRAWING LAB

The purpose of this Laboratory is to study all basic fundamental of engineering drawing like as points, lines, surfaces, quadrants, first angle and second angle projection etc. This lab is valuable for all engineering student because drawing is first step of engineering.

WORK SHOP TECHNOLOGY LABORATORY

The purpose of this Laboratory is to study the machines, manufacturing process, welding, carpentry and fitting which is valuable for all branches students.

  • List of Equipment’s in the laboratory.
  1. Lathe Machine.
  2. Shaper Machine .
  3. Bench Grinder.
  4. Hand Grinder.
  5. Bench Drilling Machine.
  6. Pedestal Drilling Machine.
  7. Foot Sheering Machine.
  8. Bench Vice.
  9. Carpentry Vice.
  10. Surface Plate.
  11. Hand Drilling Machine.
  12. Circular Saw Portable.
  13. Arc Welding Set.
  14. Power Hack Saw.
  15. Welding Booth.
  16. Combination Set.
  17. Dial Test Indicator.
  18. Vernier Height Gauge.
  19. Vernier Caliper.
  20. Digital Vernier Caliper Micrometer.

MACHINE DRAWING LAB

The purpose of this Laboratory is to study drawing of different mechanical components in different views like as front view, top view and side view. The students will make drawing in this lab machine voice, lathe tail stock, steam stop valve and bearing.

MATERIAL SCIENCE LABORATORY

The purpose of the Laboratory is to study of mechanical behavior, materials processing and characterization. In this lab we focus on heat treatment process, crystal structure, crystal imperfection, mechanism of chemical corrosion.

  • List of Equipments in the laboratory.
  1. Metallurgical Microscopes.
  2. Heat Treatment Furnace.
  3. Mounting Press.
  4. Polishing Machine.
  5. Cutting Machine.
  6. Abrasive Belt Grinder.
  7. Rough Polishing Machine.

KINEMATICS OF MACHINES LABORATORY

The purpose of this Laboratory is to study of mechanical link, pairs, mechanisms and inversions, joints, brakes etc. The knowledge of mechanism give information how to transfer power in machine through one link to other like which is helpful in industrial applications.

  • List of Equipment’s in the laboratory.
  1. Models of linkages and pairs.
  2. Models of different types of four bar mechanisms.
  3. Models of different types of single slider crank mechanisms.
  4. Models of different double slider mechanisms.
  5. Models of gears and gear trains.
  6. Cam analysis machine.
  7. Models of brakes.
  8. Miscellaneous mechanism models.

ENGINEERING MECHANICS LABORATORY

The purpose of this Laboratory is to study the mechanical behaviour of the structures and machines using theoretical and experimental methods and Mechanical behaviour is understood here to imply the statics, dynamics and stability of both rigid and deformable objects.

  • List of Equipments in the laboratory.
  1. Cantilever Beam apparatus along with its accessories..
  2. Two Hinged Arch apparatus.
  3. Three Hinged Arch apparatus.
  4. Elastic Displacement of Curved member apparatus.
  5. Elastic properties of Deflected Beam apparatus.
  6. Redundant Joint apparatus.
  7. Column & Struts apparatus.
  8. Clark’s Maxwell reciprocal theorem apparatus.
  9. Simple supported beam apparatus.

COMPUTER AIDED DESIGN LABORATORY

The purpose of the Computer Aided Design is creates design for multidisciplinary engineering. This is used as a research and project lab with high speed interne facility for B.Tech as well as M. Tech students.

  • List of Software in the laboratory.
  1. Pro. E. 2.0
  2. Auto Cad 2015

FLUID MECHANICS LABORATORY

The purpose of this Laboratory is an introduction to the mechanics of incompressible and compressible fluids. It covers the principles and more important theories of modern fluid mechanics. It covers measuring devices and techniques, error analysis in experimental works and analysis of assumptions in the theory of fluid mechanics.

  • List of Equipment’s in the laboratory.
  1. Bernouli Theorem Apparatus.
  2. Pipe friction apparatus.
  3. Apparatus for determination of losses in pipe fitting.
  4. Notch apparatus.
  5. Apparatus for conducting orifice experiment.
  6. Triple apparatus for determination of Metacentric Height.
  7. Impact & Jet apparatus..
  8. Apparatus to find Reynolds Number.
  9. Impact & Jet apparatus.

STRENGTH OF MATERIALS LABORATORY

The purpose of this Laboratory is physical science that looks at the reaction of a body to movement and deformation due to mechanical, thermal and other loads. The student will perform test on different materials torsion, bending, tension, compression and buckling.

  • List of Equipment’s in the laboratory.
  1. Tensile testing m/c.
  2. Torsion testing m/c.
  3. Impact testing m/c.
  4. Rockwell testing m/c.
  5. Cupping testing m/c.
  6. Vicker testing m/c.

STEAM AND POWER GENERATION LABORATORY

The purpose of this Laboratory is study of components required for power generation in a thermal power plant, steam generation devices (boilers), Boiler mounting and accessories, nozzle, condenser and cooling tower. In this lab the students will analysis of dryness fraction and fuel calorific value.

  • List of Equipment’s in the laboratory.
  1. Induced draft cooling tower fully instrumented.
  2. Bomb calorimeter.
  3. Dead weight tester.
  4. Models of boilers and their mountings.
  5. Compressor test rig.

I.C. ENGINE AND GAS TURBINE LABORATORY

The purpose of this Laboratory is study of construction and performance characteristics of internal combustion engine like as two stroke and four stroke, S.I. and C.I. Engines, combustion analysis, Balance sheet of multiple cylinder engine and study of exhaust and emissions characteristics.

  • List of Equipment’s in the laboratory.
  1. Four cylinder petrol engine test rig with Morse test.
  2. Single cylinder diesel engine test rig with rope brake dynamometer.
  3. Single cylinder two stroke petrol engine test rig.
  4. Orsat apparatus.
  5. Nodal & Reaction Steam Turbine.

AUTOMOBILE ENGINEERING LABORATORY

The purpose of this Laboratory is to study of different type system in automobile engineering like as transmission system, Braking system, cooling system, hydraulic system, steering system, differential system.

  • List of Equipment’s in the laboratory.
  1. Cut sectioned multi-cylinder petrol engine and power train of Maruti 1000 car.
  2. Electrical system of an automotive demonstration Rig.
  3. Lubrication system demonstration Rig.
  4. Four speed gear box demonstration Rig.
  5. Steering system demonstration Rig.
  6. Models of clutches, brakes & differential system .
  7. Cut sectioned multi cylinder diesel engine
  8. Four speed gear box demonstration Rig.
  9. Cut sectioned Carburetor.